Latest CheckPoint 156-582 Practice Test Questions, Check Point Certified Troubleshooting Administrator – R81.20 Exam Dumps [Q23-Q47]

17Jan 2025 by admin No Comments

4/5 - (1 vote)

Latest CheckPoint 156-582 Practice Test Questions, Check Point Certified Troubleshooting Administrator – R81.20 Exam Dumps

Jan-2025 Pass CheckPoint 156-582 Exam in First Attempt Easily

NO.23 The URL filtering cache limit exceeded. What issues can this cause?

When URL filtering cache exceeds the limit, it will be disabled temporarily to overcome instability of the system

RAD process will spawn multiple times to help populate the cache

Resource Advisor (RAD) process on the Security Gateway consumes close to 100 percent of the CPU

Nothing, the Security Gateway dynamically raises the cache when needed

NO.24 You tested the connection from source to destination and you are not able to find logs in your Security Management. What is the best possible reason?

The FWM process crashed on Security Management, therefore logging will not work.

There is not enough storage in Security Management, so the logs can’t be stored.

The logging blade was not enabled on Security Gateway.

The gateway is logging locally.

NO.25 How many different types of Service Requests exist?

NO.26 Application Control and URL Filtering update files are located in which directory?

SCPDIR/appi/update

SFWDIR/conf/update

SCPDIR/apci/update

SFWDIR/appi/update/

NO.27 What is the difference between the “Super User” and “Read Write All” SmartConsole permission profiles?

“Read Write All” has the extra ability to make changes within the Gaia operating system

“Super User” has the extra ability to administer other administrative accounts

“Super User” has the extra ability to make changes within the Gaia operating system

“Super User” had the extra ability of being able to use the Management API

NO.28 How would you check the connection status of a gateway to the Log server?

Run netstat -anp | grep :257 in CLISH on Log server

Run netstat -anp | grep :257 in expert mode on Log server

Run netstat -anp | grep :18187 in expert mode on Log server

Run netstat -anp | grep :18187 in CLISH on Log server

NO.29 What Check Point process controls logging?

CPWD

FWD

CPD

CPM

NO.30 What file extension should be used with fw monitor to allow the output file to be imported and read in Wireshark?

.pea

.exe

.cap

.tgz

NO.31 What is the name of a protocol for VPN establishment and negotiation?

NAT-T

IPsec

VPN

IKE

NO.32 Which of the following is true about tcpdump?

Running tcpdump without the correct switches will negatively impact the performance of the Firewall

A tcpdump session can be initiated from the SmartConsole

The tcpdump can only capture TCP packets and not UDP packets

The tcpdump has to be run from clish mode in Gaia

NO.33 What is the process of intercepting and logging traffic?

Debugging

Forensics Analysis

Logging

Packet Capturing

NO.34 Running tcpdump causes a significant increase in CPU usage, what other option should you use?

NO.35 Which is the correct “fw monitor” syntax for creating a capture file for loading it into Wireshark?

fw monitor -e “accept <FILTER EXPRESSION*;” > Output.cap

This cannot be accomplished as it is not supported with R80.10

fw monitor -e “accept <FILTER EXPRESSION^” -o Output.cap

fw monitor -e “accept <FILTER EXPRESSION*;” -file Output.cap

NO.36 Services with expired licenses and contracts have,

full functionality for 90 days after they expire

full functionality for 45 days after they expire

no functionality

limited functionality

NO.37 After deploying a new Static NAT configuration, traffic is not getting through. What command would you use to troubleshoot internal problems with the NAT traffic?

fw ctl kdebug + xlate xltrc nat

cp ctl zdebug + xlate xltrc nat

fw ctl zdebug + xlate xltrc nat

cp ctl kdebug + xlate xltrc nat

NO.38 Check Point provides tools & commands to help you identify issues about products and applications.
Which Check Point command can help you display status and statistics information for various Check Point products and applications?

cpstat

CP-stat

CPview

fwstat

NO.39 What is the default protection profile for Autonomous Threat Prevention?

Perimeter

Guest

Internal

Bypass

NO.40 When opening a new Service Request, what feature is in place to help guide you through theprocess?

The SmartConsole Help feature

The TAC chat room

An SR wizard

An SR API

NO.41 The Check Point FW Monitor tool captures and analyzes incoming packets at multiple points in the traffic inspections. Which of the following is the correct inspection flow for traffic?

(i) – pre-inbound, (I) – post-inbound, (o) – pre-outbound, (O) – post-outbound

(o) – pre-outbound, (O) – post-inbound, (i) – pre-inbound, (I) – post-inbound

(O) – post-outbound, (o) – pre-outbound, (I) – post-inbound, (i) – pre-inbound

(1) – pre-inbound, (i) – post-inbound, (O) – pre-outbound, (o) – post-outbound

NO.42 What are the available types of licenses in Check Point?

Evaluation, Perpetual, Trial, Subscription

Evaluation, Perpetual, Test, Free

Free, Evaluation, Annual, Lifetime

Annual, Perpetual, Test, Free

NO.43 When running a debug with fw monitor, which parameter will create a more verbose output?

-I

-i

-D

NO.44 You want to print the status of WatchDog-monitored processes. What command best meets your needs?

cpwd_admin list

tcpdump

cppcap

cpplic print

NO.45 When managing the disk space for locally stored logs, the Delete threshold for the gateway cannot be more than what percentage of the total disk space?

10%

75%

50%

25%

NO.46 When running the cplic command, what argument is used to show the Signature key?

-x

-rn

-s

-yall

NO.47 Which type of NAT allows both incoming and outgoing connections?

Both Static and Hide NAT

Hide NAT

Static NAT

Port NAT

CheckPoint 156-582 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshooting Application Control & URL Filtering: This section of the exam measures the skills of the target audience in covering troubleshooting related to application control and URL filtering features.
Topic 2	Troubleshooting NAT: This section of the exam measures the skills of Check Point security administrators and covers troubleshooting Network Address Translation (NAT) configurations. It emphasizes understanding NAT rules, translations, and common pitfalls.
Topic 3	Troubleshooting SmartConsole: This section of the exam measures the skills of Check Point security professionals and covers troubleshooting techniques specific to SmartConsole, the management interface for Check Point products.
Topic 4	Fundamentals of Traffic Monitoring: This section of the exam measures the skills of Check Point security administrators and covers essential techniques for monitoring network traffic. It includes understanding traffic flows, analyzing logs, and identifying anomalies.
Topic 5	Licenses and Contract Troubleshooting: This section of the exam measures the skills of Check Point security administrators and covers troubleshooting related to licensing issues and contract management for Check Point products.
Topic 6	Basic Site-to-Site VPN Troubleshooting: This section of the exam measures the skills of Check Point security administrators and covers foundational troubleshooting techniques for site-to-site VPN connections. It includes diagnosing connectivity issues and verifying configuration settings.
Topic 7	Autonomous Threat Prevention Troubleshooting: This section of the exam measures the skills of Check Point security administrators and covers troubleshooting techniques for autonomous threat prevention systems. It emphasizes understanding threat detection mechanisms and response actions.

Free 156-582 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.practicematerial.com/156-582-exam-materials.html

CheckPoint 156-582 Exam Syllabus Topics:

Leave a Reply Cancel reply