[Oct 05, 2026] PracticeMaterial C-DBADM-2601 dumps & SAP Certification Exams sure practice dumps [Q34-Q57]

NO.34 A manufacturing firm uses SAP HANA Cloud for analytics and an on-premises SAP HANA system for operational reporting. After a weekend parameter change, users report that a recurring operational report now completes, but much more slowly than before. Monitoring shows the database is available, CPU is elevated during the report window, and memory consumption remains within expected limits. A junior administrator proposes increasing system resources immediately.
The team lead wants the least disruptive action first because the slowdown affects only one workload pattern, not the entire database. The administrators can review runtime indicators and configuration settings through the available administration tools.
Which action is the best first step?

NO.35 A regional chemicals distributor is preparing an SAP HANA installation handover for a newly built on-premises administration environment. The installation process completed, and the database starts successfully. During handover review, the administrator finds that the installation record confirms software setup but does not include evidence that backup scheduling and monitoring checks were enabled for the new system. The infrastructure lead wants to accept the environment because startup was successful.
The constraint is that the administrator must confirm the installed system is ready for routine administration before handover. The decision must include post-installation operational controls, not only installation completion.
Which action best supports the handover decision?

NO.36 CHALLENGE 3 – Modernization Readiness Boundary Control
The rollout coordinator asks for one readiness statement covering the current plant wave and future SAP HANA Cloud analytics migration. The plant systems have backup and monitoring evidence, while the cloud database has provisioning and limited test data only. Which action best supports accurate release planning?

NO.37 A regional electronics distributor is validating an SAP HANA upgrade rehearsal in an on-premises environment. The database starts successfully after the upgrade, and SAP HANA cockpit shows normal availability. During administrative validation, hdbsql checks from the operations workstation fail with a client compatibility message, while cockpit-based checks continue to work. The upgrade record confirms the database revision was updated, but the workstation tooling was not reviewed after the rehearsal.
The constraint is that the administrator must confirm post-upgrade administration through the required mixed tooling before approving the production window. The team must not treat cockpit-only validation as sufficient.
Which action best completes the upgrade validation?

NO.38 CHALLENGE 3 – Cloud Migration Readiness Separation
The steering update needs to cover current UAT release readiness and future SAP HANA Cloud reporting migration. The on-premises UAT systems have backup and monitoring evidence, while the cloud database has provisioning and limited data only. Which action best supports accurate decision-making?

NO.39 A food distribution company uses SAP HANA for warehouse performance reporting. The administrator performs a scheduled recovery test in a non-production validation environment using the latest available backup set. The restore starts successfully, but validation shows that the recovered database does not include the expected transactions from the final hour before the backup window closed. The backup monitor shows successful data backup completion and a later log backup entry marked as delayed.
The constraint is that the administrator must validate the agreed recovery point before the backup process is accepted. The team cannot treat a successful restore start as sufficient evidence of recovery readiness.
What should the administrator do next?

NO.40 A regional commercial cleaning company uses SAP HANA for workforce allocation analytics in an on-premises environment. After planned maintenance, SAP HANA cockpit shows the database as available, and users can refresh dashboards. During validation, the administrator finds that the post-start checklist was completed from an administrator workspace that still points to the previous maintenance profile. The active operations profile used by the scheduled administration cycle has not been validated after startup.
The constraint is that the administrator must prove the active operations profile is ready for scheduled administration. The activity cannot be closed based on evidence from a workspace that is no longer the operational reference.
Which action best resolves the post-start validation issue?

NO.41 A regional furniture manufacturer is rehearsing migration from SAP HANA on-premises to SAP HANA Cloud. The source export completes, and the cloud database can be queried after import. During review, the administrator finds that the validation workbook records successful query checks but does not show that the cloud target was added to the routine monitoring rotation used by the operations team. The project lead wants approval because the migrated data is visible.
The constraint is that the migration wave must prove that the target can be operated after import, not only queried. The validation pattern must remain repeatable for later SAP HANA Cloud migration waves.
Which recommendation is most appropriate?

NO.42 A regional ticketing platform uses SAP HANA for transaction trend reporting. The database remains available, but SAP HANA cockpit shows recurring alerts for failed monitoring checks from one administration host. Other monitoring tiles continue to update, and users can still run reports. The operations analyst suggests closing the alert because the database itself is responding and only one monitoring source is affected.
The constraint is that the administrator must restore complete monitoring coverage before the next peak sales window. The team needs evidence that the failed check path is corrected, not just proof that SAP HANA can still process reporting queries.
Which action best resolves the monitoring coverage issue?

NO.43 A university research center operates SAP HANA in a mixed landscape while preparing administrative standards for both an on-premises database and an SAP HANA Cloud environment. During a readiness review, the administrator notices that the operations checklist treats database availability, administration tooling access, backup review, and migration readiness as one generic “SAP HANA ready” status. SAP HANA cockpit shows the on-premises system as available, while SAP HANA Cloud Central shows the cloud target as provisioned but not yet used for active workloads.
The constraint is that the administrator must avoid approving a readiness status that hides environment-specific responsibilities. The checklist must support clear operational validation without redesigning the landscape.
Which action best improves the readiness review?

NO.44 CHALLENGE 2 – Maintenance Simulation Monitoring Baseline
Patient-flow analytics varied during the planned maintenance simulation, and the clinical operations lead requests tuning before the readiness review closes. The monitoring baseline has not been fully captured, and some thresholds still reflect the earlier steady-state reporting profile. What should the database owner do first?

NO.45 CHALLENGE 4 – Release Recoverability Evidence Gate
The release lead can approve UAT sign-off on schedule using backup completion evidence, or delay briefly to include recovery validation for the UAT database and recoverability evidence for the upgraded system. Which path is most defensible?

NO.46 A regional construction materials company is preparing an SAP HANA upgrade in an on-premises administration environment. The upgrade package is staged, and SAP HANA cockpit shows the database as available. During the pre-upgrade validation, the administrator finds that one prerequisite check was executed against an earlier prepared host path instead of the currently approved package location. The validation summary still shows several green checks from the earlier preparation run.
The constraint is that the administrator must avoid starting lifecycle execution from stale preparation evidence. The maintenance window is short, but the upgrade can only begin if the current staged package and current environment state have both been validated.
Which action best supports a controlled upgrade decision?

NO.47 A regional textile exporter is rehearsing migration from SAP HANA on-premises to SAP HANA Cloud. The migration preparation checklist confirms that the source database backup was completed, and the cloud target is reachable through database explorer. Before the transfer window, the administrator notices that the checklist does not record whether the source backup was selected as the migration baseline for this rehearsal. The project lead wants to continue because both source backup and target access are confirmed.
The constraint is that the rehearsal must use a clearly identified source baseline so results can be traced after import. The team must avoid a transfer that cannot be tied back to the exact prepared source state.
Which recommendation best addresses the migration preparation risk?

NO.48 A transportation company maintains an on-premises SAP HANA database for dispatch operations while newer planning data is being moved into SAP HANA Cloud. During a recovery readiness review, the administrator confirms that full backups are being created on schedule. However, a validation exercise shows that the expected recovery point for recent operational updates cannot be reached during simulation.
The backup catalog is present, and database availability remains normal. One team member proposes creating an additional full backup immediately to strengthen protection. The service manager instead wants the next action to close the recovery exposure for current operations, not only improve future coverage.
What is the best next action?

NO.49 CHALLENGE 2 – Maintenance Simulation Monitoring Baseline
The database team can tune workload-related settings now to improve patient-flow analytics or preserve monitoring evidence first and tune only if current evidence supports it. Which option best balances performance and evidence quality?

NO.50 CHALLENGE 1 – UAT Configuration Evidence Reconciliation
The upgraded reporting system and the newly installed UAT database both pass connection checks. The upgraded system’s configuration value exists in a release note, while the UAT database value exists in the administration record. Which validation sequence is most appropriate?

NO.51 CHALLENGE 2 – Restoration Simulation Monitoring Baseline
A performance specialist suggests applying tuning before preserving baseline evidence because the second UAT run needs better response time. The database owner is concerned about later release comparison. Which decision is most appropriate?

NO.52 A regional medical devices distributor is preparing an SAP HANA upgrade rehearsal for an on-premises database. The upgrade package is available, and the database is currently running. Before the rehearsal begins, the administrator compares the maintenance checklist with the validation output and finds that the prerequisite check was completed before the latest package was staged. SAP HANA cockpit still shows normal availability, and the technical lead wants to proceed because the system has not reported an error.
The constraint is that the administrator must base the upgrade decision on preparation evidence that matches the current package state. The rehearsal should not begin from validation output created before the final staged artifact was present.
What should the administrator do before starting the rehearsal?

NO.53 CHALLENGE 1 – Supplier Allocation Readiness for Shared Material Demand
During cutover rehearsal, two plants generate recurring demand for the same packaging material family. Both plants have approved suppliers available, but only one plant follows the expected supplier distribution pattern once purchase documents are created. The sourcing lead wants to preserve a shared support model after go-live rather than rely on local buyer judgment.
What is the best first validation action?

NO.54 CHALLENGE 4 – Rollout Recovery Validation Gate
Backups completed for the upgraded pilot system and the newly installed SAP HANA wave database before the rollout checkpoint. Recovery validation for the wave database is scheduled but not complete, and the pilot system has only backup completion evidence. What should happen before wave release approval?

NO.55 CHALLENGE 1 – Plant Wave Configuration Evidence Alignment
The rollout coordinator wants to approve the next plant wave because the reporting outputs look consistent at a high level. The administration team has not confirmed whether the upgraded pilot system and newly installed wave database have comparable configuration records. Which decision best supports rollout readiness?

NO.56 A regional consumer packaging company is rehearsing migration from SAP HANA on-premises to SAP HANA Cloud. The transfer completes, and the cloud target can be queried. During review, the administrator finds that validation results were captured from a temporary administrator account used only for the rehearsal. The planned operations team will use a different cloud administration identity after cutover, and no checks have been run with that identity.
The constraint is that the migration wave must prove repeatable post-migration administration, not only successful rehearsal access. The team wants the same validation pattern to be reused for later migration waves.
Which recommendation is most appropriate?

NO.57 A regional publishing group runs SAP HANA for subscription analytics. A scheduled backup completes successfully, but the backup monitor shows a warning that the follow-up verification step did not finish before the operations cutoff. The administrator can see the backup artifact, and a supervisor suggests marking recovery readiness as complete because the backup itself exists.
The constraint is that the resilience report must confirm that the backup can be used in the recovery procedure, not only that a backup file was created. The report is due before the next business cycle starts.
Which action best supports the resilience report?