N10-007 Tested & Approved CompTIA Network+ Study Materials [Q113-Q134]

Rate this post

N10-007 Tested & Approved CompTIA Network+ Study Materials

Validate your Skills with Updated CompTIA Network+ Exam Questions & Answers and Test Engine

NO.113 As part of a new datacenter upgrade project, the security manager has asked for additional physical security to prevent asset theft. Which of the following technologies should be implemented?

 
 
 
 

NO.114 Management has requested that services be available within 72 hours of a disaster. Budget is a major concern.
A contract is signed with a company that has plenty of space, and the technician will have the option of putting infrastructure equipment in place. Which of the following BEST describes this business continuity strategy?

 
 
 
 
 
 

NO.115 Which of the following allows for file-level network storage?

 
 
 
 

NO.116 A technician has been asked to install biometric controls at the entrance of a new datacenter.
Which of the following would be appropriate authentication methods to meet this requirement?
(Choose two.)

 
 
 
 
 
 
 

NO.117 Which of the following BEST describes the BGP routing protocol?

 
 
 
 

NO.118 Users in the administration building of a multi-building campus are reporting loss of network connectivity. A network technician suspects conversation workers may have severed the link between the core switch located in the datacenter in the administration building’s distribution switch. Which of the following tools should be used to identity where the break occurred?

 
 
 
 

NO.119 A Chief Information Officer (CIO) wants to control the category of sites that employees access when using the Internet web browser. This objective must be achieved to be compliant with corporate policy and avoid some security and legal risks. Which of the following devices would BEST accomplish this task? (Choose two.)

 
 
 
 
 
 

NO.120 You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the screen.
Instructions
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the ‘Submit’ button.
If at any time you would like to bring back the initial state of the
SIMULATION, please click the Reset All button.

NO.121 A network technician is investigating an issue with a desktop that is not connecting to the network. The desktop was connecting successfully the previous day, and no changes were made to the environment. The technician locates the switchport where the device is connected and observes the LED status light on the switchport is not lit even though the desktop is turned on Other devices that arc plugged into the switch are connecting to the network successfully Which of the following is MOST likely the cause of the desktop not connecting?

 
 
 
 
 

NO.122 Which of the following protocols can be both connection-oriented and connectionless?

 
 
 
 

NO.123 Client PCs are unable to receive addressing information from a newly configured interface on a router.
Which of the following should be added to allow the clients to connect?

 
 
 
 

NO.124 Which of the following would allow a network technician to access files on a remote system? (Select TWO).

 
 
 
 
 
 

NO.125 A network engineer is designing a new network for a remote site. The remote site consists of ten desktop computers, ten VoIP phones, and two network printers. In addition, two of the desktop computers at the remote site will be used by managers who should be on a separate network from the other eight computers.
Which of the following represents the BEST configuration for the remote site?

 
 
 
 

NO.126 A company has attempted to introduce a new major network segment to allow growth in capacity. On the core switch, a GBIC was used to interconnect with a newly placed downstream distribution switch for the first time. Soon after this implementation, a network flood and an outage occurred between the core and new distribution network modules. Which of the following should the network administrator troubleshoot FIRST in order to rectify the issue?

 
 
 
 

NO.127 An additional laptop was recently added to a wireless network. Since then, multiple users have reported poor performance. Upon investigation, the network technician discovers the laptop uses an
802.11b wireless NIC. Which of the following BEST describes the issue?

 
 
 
 

NO.128 Your company recently purchased a new building down the street from the existing office. For each of the tasks below, select the appropriate antenna type and encryption object for all wireless access point (AP).
1. Create an encrypted wireless connection between the two buildings that BEST controls signal propagation, while maximizing security.
2. Restrict the wireless signal generated by the access points (APs) inside Building 1, so that it minimizes broadcast beyond the building.
3. Maximize wireless coverage inside Building 1.
4. Building 1’s internal wireless network is for visitors only and must not require any special configuration on the visitor’s device to connect.

Instructions: When you have completed the simulation, select the Done button to submit.

NO.129 A web application is unable to authenticate customers so they can access their bills. The server administrator has tested the LDAP query but is not receiving results. Which of the following is the NEXT step the server administrator should take to correct the problem?

 
 
 
 

NO.130 A company has attempted to introduce a new major network segment to allow growth in capacity. On the core switch, a GBIC was used to interconnect with a newly placed downstream distribution switch for the first time. Soon after this implementation, a network flood and an outage occurred between the core and new distribution network modules.
Which of the following should the network administrator troubleshoot FIRST in order to rectify the issue?

 
 
 
 

NO.131 A network engineer has been assigned a support ticket for a PC that will not connect to the network in a new area of the building. The engineer knows the PC should be assigned to the PC VLAN (VLAN 1101) and should have an IP in the 172.16.250.0/22 range. While talking with the hardware team, the engineer is told this is the first PC to be installed in this area. The engineer then logs into the edge switch the PC is connected to and looks at the configuration. Given the output below:

Which of the following BEST explains the reason why the PC cannot connect?

 
 
 
 

NO.132 A company has two geographically separate locations that need to connect using a VPN. Which of the
following devices must be specifically configured to allow VPN traffic into the network?

 
 
 
 

NO.133 A user is unable to open up websites on the Internet from a browser. The administrator determines that the workstation can ping its local gateway, but not the remote web server.
At which of the following layers of the OSI model does the problem MOST likely exist?

 
 
 
 

NO.134 Which of the following technologies is MOST likely used to provide connectivity to multiple IoT devices within a room without access to the WLAN?

 
 
 
 

N10-007 [Jul-2022] Newly Released] N10-007 Exam Questions For You To Pass: https://www.practicematerial.com/N10-007-exam-materials.html

Related Links: myportal.utt.edu.tt learn.csisafety.com.au myportal.utt.edu.tt www.competize.com gitflic.ru myportal.utt.edu.tt

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below