2022 Valid 1z0-1075-22 FREE EXAM DUMPS QUESTIONS & ANSWERS [Q10-Q34]

14Jul 2022 by admin No Comments

Rate this post

2022 Valid 1z0-1075-22 FREE EXAM DUMPS QUESTIONS & ANSWERS

Free 1z0-1075-22 Exam Braindumps Oracle Pratice Exam

Q10. Identify two reports that provide work ordercost-related information to the costing user.

Work order Operational Analysis

WIP Balance by Plant

Purchase Variance Summary

Cost Accounting Dashboard

Q11. A Production Operator needs to load Work Order Transactions from an external system into Manufacturing Cloud.
Identify the correct sequence of tasks to be performed.

LoadData to Fusion repository> Export File to UCM server > Process Import Operations Transactions> Load file from UCM to Interface table.

Export File to UCM server> Load Data to Fusion repository> Process Import Operations Transactions> Load file from UCM to Interface table.

Load Data to Fusion repository> Export File to UCM server > Load file from UCM to Interface table
>Process Import Operations Transactions.

Load Data to Fusion repository> Load File from UCM to Interface table> Export File to UCM server> Process Import Operations Transactions.

Q12. Your customer plans to use Oracle Representational State Transfer (REST) API with Oracle Supply Chain Management Cloud (Oracle SCM Cloud) to support integration requirements.
Identify four REST resources and thecorresponding HTTP action available with Manufacturing Cloud.

Work Order Status GET method

Work Orders GET method

Work Order Status POST method

Work Orders PATCH method

Resource transaction POST method

Resource transaction GET method

Q13. During a Manufacturing Cloud implementation, the customer request to develop Oracle Transactional Business Intelligence reports that are not available out-of- the box.
Identify the tool that is available to the Report Developer in Manufacturing Cloud to develop the reports.

Oracle Business Intelligence Standard Edition

Oracle Business Intelligence Publisher

Oracle Business Intelligence Enterprise Edition

Oracle Business Intelligence Application

Q14. You are monitoring the production status on your shop floor. The production operator informs you that a particular resource that was not functioning for the past week is now back in operation.
Which option shows the steps to quickly release the work orders affected by this operation, which were put on hold using the mobile application?

Select the infotile On Hold> Select awork order you want to release> Select the work order operation on hold > Swipe left on the work order name> Tap or click the Release action, and click OK

Select the infotile On Hold> Select a work order you want to release> Swipe left on the work ordername> Tap or click the Release action, and click OK

Select the infotile Unreleased> Select a work order you want to release>Swipe left on the work order name> Tap or click the Release action, and click OK

Select the infertile Dispatch List> Select awork order operation you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK

Q15. While creating an item in Product Information Management (PIM), the following two item templates are selected in sequence and applied.
1. Template: Finished Goods (WIP = No, Customer Ordered =Yes)
2. Template: Sub-assembly (WIP = Yes, Customer Ordered = No)
Identify the Item Attribute values in the application.

WIP = Yes, Customer Ordered = Yes

WIP = Yes, Customer Ordered = No

WIP = No, Customer Ordered = Yes

WIP = No, CustomerOrdered = No

Q16. Your customer runs two daily shifts in her plant: Morning Shift and Evening Shift. A resource LATHE is assigned to the work center W1. There are five units of LATHE available, of which three units are available for the MorningShift and the remaining units are available for the Evening Shits.
Which two actions must you perform to associate LATHE with W1?

Do not select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.

Select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.

Select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.

Do not select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.

Do not select the Available24 Hours check box and in the Resource Availability region, enter 60% against the resource LATHE in the Morning Shift column.

Do not select the Available 24 Hours check box and in the Resource Availability region, enter 40% against the resource LATHE in the Evening Shift column.

Q17. A Production Supervisor queries a Work Order (WO-1025) from the manage Work Orders page. On the Entering Edit Work Order: WO-1025 page, he finds General Information, Operations and History tab, but not the Reservations tab.
Identify the two reasons that can cause the Reservations tab not to be displayed.

Work Order (WO-1025) is not a Configured item Work Order.

Work Order (WO-1025) is not a Back-to-Back Work Order.

Work Order (WO-1025) is not a Drop-ShipWork Order.

Work Order (WO-1025) is not a Pick-to-order Work Order.

Work Order (WO-1025) is not a Plan-to-produce Work Order.

Q18. Your customer wants to mass create and modify Work Definitions and the relevant operation, items, and resources available in the spreadsheet.
Which two operations are not supported using ADFDI (Oracle Application Development Framework Desktop Integration)?

Create Work Definitions

Update Work Definitions

Create and update ATO (Assemble To Order) model work definitions

Populate Descriptive flexfields

Q19. The production user wants to report Work Order completion.
Identify two ways of reporting the progress of work order at work order operation level.

Change Move status to Ready.

Complete using quantity completion

Complete with Details

Quick Complete

Change status of Operation to completed

Q20. You are setting up Fusion Manufacturing to support Back-to-BackFulfillment.
Identify an option that needs to be set for oracle Fusion Planning Central to plan back-to-back item components and resources.

Select the Used in Planning check box in the new Work Definition.

Select the Used in Planning check box inthe Work Definition Names.

Select the Used in Planning check box in the Work Structure.

Select the Used in Planning check box in the item definition.

Q21. An employee is responsible for dealing with different manufacturing practices and processes, machines, tools and equipment that turn raw material into a product.
Which seeded job role must this employee be provided with?

Manufacturing Engineer

Production Engineer

Production Operator

Manufacturing Supervisor

Production Supervisor

Q22. During a Manufacturing Cloud implementation, the Production Supervisor wants to close thework orders for last month and wants to make sure that the work orders include the correct cost.
Identify the approach to be taken by the Production Supervisor.

The Production Supervisor need not include cost variances while costing last month’s workorders because those can be applied directly in subledger accounting.

The Production Supervisor needs to include all costs and variances in last month’s work orders and close them; however, the work orders where updates are expected, should not be closed.

The Production Supervisor should make sure that all costs are included while closing last month’s work orders; however, variances can be included after closing the work orders.

Work order costs can be updated anytime regardless of the status of the work order.

Q23. A manufacturing cloud user wants to print information available in the work order in PDF.
Identify the three reports that the user can print directly from the work order screen using the Print PDF action.

Work Order Traveler

Resource List

Print Labels

Print Component List

Bill of material

Q24. A plantruns 24×7 daily using three continuous shifts of 8 hours each. One unit of an equipment resource R1 is assigned to each of the three shifts. On a specific work order, the resource R1 is required to work for 2 hours.
The resource is set up with an efficiency of 50% and utilization of 100%. R1 is scheduled to start on the given work order at noon.
What time will R1 be scheduled to finish, assuming no calendar exceptions have been set?

8:00 PM

12:30 PM

2:00 PM

4:00 PM

1:00 PM

Q25. Your customer hasthe following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goodsas one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.

Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.

Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.

The two Work Definitions can be tied through Projector Seiban numbers.

The Work Definition versions can be used to tie the Work Orders.

Q26. You arereviewing the production status of your manufacturing plant shop floor as a production supervisor.
Your production manager wants a report on a work order statuswhich is reserved against a particular customer.
The final assembly of the work order is serialized.
Which option shows the steps to complete the task using the mobile application?

Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page > Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient’s e-mail, and click Send.

Select the infotile Customer to open the work order details page> Click Actions and select the E-mail icon> Select required work orders>Select the e-mail client, enter the recipient’s e-mail, and click Send.

Use your mobile camera to scan the bar coded serial number of the final assembly> Upload the barcode to open the work order details page> Select required work orders> Click Social icon (OSN) > Select recipient, and click Share.

Search the work order by customer name to open the work order details page> Click Actions and select the E-mail icon> Select required work orders> Select the e-mail client, enter the recipient’s e-mail, andclick Send.

Q27. The Plant Manager informs you that they have bought several machines for their manufacturing plant ABC.
The plant has been set up with a separate cost element set ABC in Manufacturing Cloud. You are requested to configure these machines in such away that those are costed to the work order for which operations are performed on these machines.
Identify the correct setup that you will advise to the Plant Manager.

Set up the machines as cost element type of “Resource” by selecting Cost Element set ABC.

Set up the machines as cost element type of “Overhead” by selecting Cost Element set ABC.

Set up the machines as cost element type of “Overhead” by selecting Cost Element set Common.

Set up the machines as cost element type of “Resource” by selecting Cost Element set Common.

Q28. Identify the three sources from which supply chain orchestration (SCO) can create the work orders.

Order Management

Quality

Inventory Min-Max Planning

Procurement

Planning

Q29. To reduce the subassembly stock with no impact on material planning of child components of the subassemblies stock, you need to modify the multilevel item structure of a product.
Identify the action that meets this requirement.

Change the Supply Type = Push in Itemdefinition and Work Definition, for subassemblies having high inventory stock.

Change the Supply Type = Phantom in Item definition and Work Definition, for subassemblies having high inventory stock.

Change the Supply Type = Assembly Pull in Item definition and Work Definition, for subassemblies having high inventory stock.

Change the Supply Type = Operation Pull in Item definition and Work Definition, for subassemblies having high inventory stock.

Q30. A production operator needs to review the materials issued, resources charged, and operations performed for a job that was executed inthe previous shift.
Identify the task the operator has to select to review all the transactions in a single place for both Work Order and Orderless execution.

Manage Work Orders

Review Dispatch List

Report Resource, Material and OperationTransactions

Review Production Transaction History

Q31. Your Customer has implemented Oracle Cloud Manufacturing and the Manufacturing user is in the process of defining Work Definition and Operations. However, this user is unable to assign an ad hoc item, Grease, to an operation.
Identify the reason.

The user doesn’t have Override Item Structure Components in the Work Definition privileges.

An itemcannot be assigned on an ad hoc basis.

The user doesn’t have access to the PIM module.

The user doesn’t have Data access to create item structure.

Q32. A Manufacturing Engineer in a plant is creating an alternative manufacturing process for an item using its existing Work Definitions. After copying from the existing Work DefinitionWD1 to the alternative Work Definition WD2, the engineer finds that the operation items were not copied in the alternative manufacturing process WD2.
Identify the reason.

The Production Priority was not populated in the new Work Definition WD2 duringcreation.

The Item and Structure Name in the existing Work Definition WD1 were retained in the new Work Definition WD2 as well during creation.

The Item and Structure Name were changed in the new Work Definition WD2 during creation.

The StartData was not populated in the new Work Definition WD2 during creation.

Q33. You can generate and manage work order exceptions in Oracle Manufacturing Cloud. Which users can report production exception andwho gets notified after an exception is raised?

The Production Operator can report and exception and the application generates a notification that is sent to all users who have access to the manufacturing plant.

The Production Operator can report anexception and the application generates a notification that is sent to all users with the role of production supervisor who have access to the manufacturing plant.

The Production Operator or Manufacturing Engineer can report an exception and notifies the production supervisor using Oracle Social Network since there is no system generated notification.

The Production Operator can report an exception and notifies the production supervisor using Oracle Social Network since there is no system-generated notification.

Q34. Identify four parameters that are considered in the calculation of manufacturing lead time in Oracle Manufacturing Cloud.

Resource calendars of the work centers involved

The primary work definition of the item

The lot size of the item

The shifts are defined in the plant calendar

Plant calendar exceptions

Resource calendar exceptions