Online Questions – Valid Practice MTCNA Exam Dumps Test Questions [Q109-Q131]

NO.109 Consider the following network diagram. In R1, you have the following configuration:
/ip route
add dst-address=192.168.1.0/24 gateway=192.168.99.2
/ip firewall nat
add chain=srcnat out-interface=Ether1 action=masquerade
On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?

NO.110 What is marked by connection-state=established matcher?

NO.111 Which of the following protocols / port s are used for SNMP. (Simple Network Managemnt Protocol)

NO.112 It is possible to add user-defined chains in ip firewall mangle

NO.113 Which of the following is used in standard 802.11 wireless networks?

NO.114 What letters appear next to a route, which is automatically created by RouterOS when user adds a valid address to an active interface?

NO.115 Which router command allows you to view the entire contents of all access lists?

NO.116 Is ARP used in the IPv6 protocol?

NO.117 If ‘check-gateway’ is enabled for an ECMP route and one of the gateways is unreachable, then:

NO.118 To use masquerade, you need to specify

NO.119 What can be used as ‘target-address’ in the simple queue?

NO.120 What protocol is used for Ping and Trace route?

NO.121 To block communications between wireless clients connected to the same access point interface, you should set

NO.122 What menus should be used to allow certain websites to be accessed from behind a Hot-Spot interface, without client authentication

NO.123 What kind of users are listed in the “/user” menu?

NO.124 Action=redirect allows you to make

NO.125 Which WLAN IEEE specification allows up to 54Mbps at 2.4GHz?

NO.126 Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client
10.10.0.33 is be able to obtain

NO.127 In WinBox when clicking the ‘Backup’ button in the Files window, the following happens (select all that apply):

NO.128 Mark all correct answers.

NO.129 Destination NAT (chain dstnat, action dst-nat) can be used to:

NO.130 It is possible to create an encrypted PPPoE tunnel in RouterOS:

NO.131 Which of the following are layers in the TCP/IP model?
Application
Session
Transport
Internet
Data Link
Physical