[Jan-2024] Latest HP HPE6-A69 Certification Practice Test Questions [Q13-Q35]

23Jan 2024 by admin No Comments

5/5 - (2 votes)

[Jan-2024] Latest HP HPE6-A69 Certification Practice Test Questions

Verified HPE6-A69 Dumps Q&As – 1 Year Free & Quickly Updates

One of the key features of the HPE6-A69 exam is that it is designed to test the candidate’s understanding of Aruba switching technologies in real-world scenarios. HPE6-A69 exam not only evaluates the candidate’s knowledge of theoretical concepts but also assesses their ability to apply these concepts to solve complex network problems. The HPE6-A69 exam is also updated regularly to ensure that it reflects the latest industry trends and technologies.

NEW QUESTION 13
Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?

Use of ACL’s to separate the company networks at the VLAN level

Use of Aruba Gateway appliance to control the routes between merged networks

Use of vsf capable switch to integrate the routing

Use of virtual route forwarding and BGP route leaking

NEW QUESTION 14
The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.
The client’s default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.

What advice can you offer the customer? (Select two)

The ISL Bandwidth should be upgraded

Agg-1 and Agg-2’s hardware forwarding table profile should be changed to “L3-agg”.

The -system-mac’ of Agg-1 should be changed to an unused address from the unicast private address range

The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.

The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.

The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.

NEW QUESTION 15
You have designed a new wired solution for a customer that uses gateways and Dynamic Segmentation Which statements about User-Based Tunneling are true? (Select two)

In U8T, the switch performs user authentication.

in UBT, the Aruba Gateway performs user authentication

UBT is supported only with Aruba Gateway standalone

in UBT, the switch sends user role Information to Aruba Gateway

In UBT, the Aruba Gateway assigns the Primary user role

NEW QUESTION 16
The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway What is required for this configuration to apply QoS user-based rules for the R&D client traffic?

Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.

Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch

Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic

Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.

NEW QUESTION 17
(Scenarios may contain multiple errors which may or may not impact the solution ) Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration It is required to implement VSX at the aggregation layer The pons of the ArubaOS-CX 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes

The VSX cluster is not forming. Which modification should you make to resolve the error condition?

Modify the system interface-group 4 speed tOg command change “25g” to “10g”

Modify the keepalive peer 192.168 20.2 source 192 168.20 1 command, changing “vrf KA” to “vrf mgmt”

Edit the vsx-sync command, adding “keep-alive”

Modify the vsx definition, changing “inter-switch-link lag 2″ to” inter-switch-link lag 256″

NEW QUESTION 18
An administrator has identified a denial of service attack that is stressing the management processor on the switch. Which actions can be applied to CoPP to mitigate the issue? (Select two.)

Set the processing priority

Create a policy that matches the payload of GRE traffic.

Regulate traffic from the OOBM Ethernet port

Apply multiple active polices for the classes of traffic

NEW QUESTION 19
Refer to the exhibit.

Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and
10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

Multi-protocol BGP routing needs to be defined for route leaking

Route Distinguisher needs to be set to 1 for default VRF.

Route leaking is supported between non-default VRFs only

Route leaking between default and non-default VRFs is supported with Aruba CX 8400.

NEW QUESTION 20
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address.
What are the minimum steps that should be performed to mitigate this condition? (Select two)

Implement arp ACLs to define trusted MAC address to IP bindings

Enable ‘arp inspection’ on the end-user physical ports

Enable ‘arp inspections on the end-user VLAN.

Implement dhcpv4-snooping

Enable ‘arp inspection untrusted on the end-user physical pons

NEW QUESTION 21
You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?

Enable debug of vri with “console” set as the destination

Setup a mirror session to generate a Tshark file.

Setup a mirror session to niter packets for TCPDUMP analysis

Check the configured VLANs using “show vsx config-consistency”

NEW QUESTION 22
An administrator warns to create an ACL.
Permit traffic from 192.168.10, 65 through 192.168.10.94
Permit traffic from 192 168 10 104 through 192 16810.119
deny all other ip traffic
Which configuration is required to accomplish the administrator’s goals?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 23
Which statement is true regarding remote mirroring?

The same source/destination address can be used in multiple sessions.

Per session multiple destination addresses can be configured

The ArubaOS-CX switch supports a maximum of two mirroring sessions

When mirroring destination is tunnel, a DSCP value can be set on the tunnel

NEW QUESTION 24
With the given access-list:

Which statement is true about hardware resource consumption of this ACL?

The ACL consumes a total of 2 entries

The ACL consumes a total of 4 entries.

The ACL consumes a total of 6 entries.

The ACL consumes a total of 8 entries.

NEW QUESTION 25
When applying me following access-Iist to an ArubaOS-CX 6300 switch:

How does this ACL behave on the selected switch? (Select two.)

The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs

The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.

The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs

NEW QUESTION 26
You have removed a member out of the ArubaOS-CX 6300 VSF configuration. The login to the removed member falls. What is true about switch login recovery?

The task requires physical access to the switch

The zeroize task executes the zeroize.txt from the root of the CF card on the switch

The zeroize task will remove all user passwords: the configuration remains on the switch

The task can be executed remotely

NEW QUESTION 27
A customer would like to utilize some ArubaOS-CX 6300M switches to perform OSPF routing.

All ports are routed, and ECMP is enabled, with other default parameters for OSPF. What will be the result of traffic sent from CLIENT-A to CUENT-B?

Traffic will be SW3 -> SW-4 -> SW-2.

Traffic win be SW3 -> SW-1 -> sw-2.

Traffic will be SW3 -> SW-1 -> sw-4 -> SW-2

Traffic will be SW3 -> SW-1 -> Sw-2 & SW3 -> SW-4 -> SW-2

NEW QUESTION 28
After a Proof of Concept where NetEdit was used to troubleshoot the network, the customer agrees that NetEdit meets some of its technical goals.
Which technical goals does NetEdit meet? (Select two.)

improve reliability of mission-critical applications

improve the network’s scalability

improve the network throughput

Minimize network downtime

Simplify network management

NEW QUESTION 29
With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use.

What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway” (Select two.)

IP Protocol 6 should not be blocked on me datapath

IP Protocol 47 should not be blocked in the data-path

The ArubaOS-CX switch and Aruba gateway should have an end-to-end MacSec connection

The ArubaOS-CX switch and Aruba gateway should be EBGP peers.

Change the default MTU on the data-path between the switch and gateway

The ArubaOS-CX switch requires plain-text authentication with OSPF.

The third-party switch should be configured with MD5 authentication

The ArubaOS-CX switch does not expect authentication with OSPF.

The third-party switch should be configured with key chain authentication

NEW QUESTION 31
What are two valid steps in a Proof of Concept plan? (Select two)

Development of the items to Be tested

Engineering a proposed solution

Definition of success criteria

Acceptance of the proposed solution

NEW QUESTION 32
Refer to the exhibit.

* For all traffic within VLAN 10. a remark action or DSCP value EF must be set
* For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 33
You need to establish a baseline summary of an ArubaOS-CX switch resource utilization after enabling new NAE scripts. How should you define a baseline for switch resource consumption? (Select two.)

show system cpu

top memory

show system memory

top cpu

NEW QUESTION 34
How Is voice Traffic prioritized correctly on ArubaOS-CX switches?

By placing it in the strict priority queue

By defining voice VLANs inside VLAN context

By attaching the QoS settings directly to device profiles

By implementing TOS-profiles

NEW QUESTION 35
A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings.
VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

To pass the HPE6-A69 certification exam, professionals must have a deep understanding of switching concepts and protocols. They must also be able to design and implement complex switching solutions that meet the needs of their organizations. Professionals who pass the HPE6-A69 certification exam are recognized as experts in the field of switching and are highly valued by employers.

Latest 2024 Realistic Verified HPE6-A69 Dumps – 100% Free HPE6-A69 Exam Dumps: https://www.practicematerial.com/HPE6-A69-exam-materials.html

Leave a Reply Cancel reply