[Nov 21, 2024] Latest HP HPE6-A73 Exam Practice Test To Gain Brilliante Result [Q74-Q95]

21Nov 2024 by admin No Comments

5/5 - (1 vote)

Latest [Nov 21, 2024] HP HPE6-A73 Exam Practice Test To Gain Brilliante Result

Take a Leap Forward in Your Career by Earning HP HPE6-A73

HP HPE6-A73 certification exam is a highly respected certification exam in the field of networking. Aruba Certified Switching Professional Exam certification exam is designed to test the knowledge and skills of professionals who are responsible for configuring and managing enterprise-level Aruba switching solutions. The HPE6-A73 exam is intended for professionals who have already gained some experience in the networking field and are looking to take their skills to the next level.

Salary of Configuring Hewlett Packard Enterprise GreenLake Solutions HP avowed topic specialists

Organization designers can procure around $110,000 or significantly more when utilized full-time. A task with Aruba Networks could even procure you a normal of $148,000 as an organization engineer, as indicated by Paysa. In the event that you need to acquire what you need as an organization engineer, the most ideal alternative is regularly to decide to independent. Functioning as an independent organization engineer, you can pick the work that you do.

Field Engineer simplifies it to look for some kind of employment and begin acquiring. The stage allows you to join in minutes, and you can before long secure the positions that are ideal for you. The worldwide commercial center allows you to look progressively to track down the most state-of-the-art occupations that are ideal for you.

QUESTION 74
Examine the configuration performed on newly deployed AOS-CX switches:

After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?

Define the server group cppm

Set the ports to client-mode

Create and assign a local user role to the ports

Enable change of authorization (CoA)

QUESTION 75
The AOS-CX mobile app allows a network engineer or technician to perform which tasks? (Choose two.)

Use NetEdit to manage switch configuration.

Create a stack of AOS-CX switches.

Transfer files between the switch and your mobile device.

Securely access the switch using SSH.

Schedule an operating system upgrade.

QUESTION 76
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes Which solution should the administrator implement?

AOS-CX S400

AOS-CX 8325

AOS-CX 6400

AOS-CX 6300

QUESTION 77
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D

Implement downloadable user roles with a gateway role defined on the AOS-CX switches

Implement local user roles with a gateway role defined on the AOS-CX switches

Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs

Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs

QUESTION 78
Which concept is implemented using Aruba’s dynamic segmentation?

Device fingerprinting

Zero Touch Provisioning

Colorless port

Root of trust

Explanation
https://blogs.arubanetworks.com/solutions/whats-hiding-on-your-network/

QUESTION 79
What are best practices when implementing VSX on AOS-CX switches? (Choose two.)

The ISL lag should use the default MTU size.

Timers should be left at their default values.

The default system MAC addresses should be used.

The keepalive connection should use a direct layer-3 connection.

The ISL lag should use at least 10GbE links or faster.

QUESTION 80
Examine the network exhibit:

The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)

Client 3 to Client 2

Client 1 to Client 2

Server 2 to Client 2

Server 1 to Client 1

Client 1 to Client 3

CL3 – CL2 – drop on forward path by core1 cause match VLAN 20 and CL3 not CL1 as SRC IP CL1 – CL2 – pass – no ACL cause forwarded by Access2 SR2 – CL2 – pass on forward path by core1 cause match VLAN 10 Drop on return path by core1 cause match VLAN 20 and no CL1 as SRC IP SR1 – CL1 – pass on forward path by core1 cause match VLAN 10 pass on return path by core1 cause match VLAN 20 and CL1 as SRC IP CL1 – CL3 – pass on forward path by core1 cause match VLAN 20 and CL1 as SRC IP drop on return path by core1 cause match VLAN 20 and not CL1 but CL3 as SRC IP

QUESTION 81
A network engineer is having a problem adding a custom-written script to an AOS-CX switch’s NAE GUI. The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:

What should the engineer perform to fix this issue?

Install the script’s signature before installing the new script

Ensure the engineer’s desktop and the AOS-CX switch are synchronized to the same NTP server

Enable trust settings for the AOS-CX switch’s SSL certificate

Remove a script that is no longer used before installing the new script

QUESTION 82
A network administrator wants to centralize the management of AOS-CX switches by implementing NetEdit.
How should the administrator purchase and/or install the NetEdit solution?

Install as a hardware appliance

Installed on a supported version of RedHat Enterprise Linux

Installed in a virtualized solution by using the Aruba-supplied OVA file

Installed on a supported version of Debian Linux

QUESTION 83
What would prevent two OSPF routers from forming an adjacency? (Select two.)

Different priorities

Different area types

Different MTU sizes

Different IP addresses

Different router IDs

QUESTION 84
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?

Local optimization was not enabled on the VSX LAG

The VSX LAG hash does not match the remote peer

The VSX LAG interfaces are in layer-3 mode

LACP was enabled in active mode on the VSX LAG

QUESTION 85
An administrator wants to drop traffic from VLAN 6 (10.1.6.0/24) to VLAN 5 (10.1.5.0/24), but allow all other traffic. What is correct configuration to accomplish this?

Option A

Option B

Option C

Option D

QUESTION 86
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:

Based on the above information, what is correct?

Area 0 has 13 routes

Core1 has no OSPF routes

Core1 has received one LSA Type 5 from the ASBR

Area 1 has 23 routes

QUESTION 87
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS’CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?

Define the account to implement change of authorization.

Speed up the AAA authentication process

implement replay protection for AAA messages

Define the account to implement downloadable user roles

QUESTION 88
An administrator creates an ACL rule with both the “count” and “log” option enabled. What is correct about the action taken by an AOS-CX switch when there is a match on this rule?

By default, a summarized log is created every minute with a count of the number of matches

Logging will not include certificate and TLS events, but counting will

The “count” and “log” options are processed by the AOS-CX switch’s hardware ASIC

The total in the “log” record and the count could contain different rule matching statistics

QUESTION 89
A network administrator is tasked to set up BGP in the company’s network. The administrator is defining an eBGP peering between an AOS-CX switch and a directly-connected service provider. The administrator has configured the following on the AOS-CX switch:

However, when using the “show bgp all summary” command, the state does not display “Established” for the eBGP peer. What must the administrator configure to fix this issue?

router bgp 64500 neighbor 192.168.1.1 ebgp-multihop

router bgp 64500 enable

router bgp 64500 address-family ipv4 unicast neighbor 192.168.1.1 activate

router bgp 64500 neighbor 192.168.1.1 update-source loopback0

QUESTION 90
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?

Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing

Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing

Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

QUESTION 91
Examine the network exhibit:

The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)

Client 3 to Client 2

Client 1 to Client 2

Server 2 to Client 2

Server 1 to Client 1

Client 1 to Client 3

QUESTION 92
An administrator wants to use an existing Aruba gateway’s firewall policies to filter both wireless and wired traffic. Which AOS-CX switch feature should a customer implement to ensure the gateway applies the same or similar firewall policies to users’ wired and wireless traffic?

GRE tunneling

User-based tunneling

Port-based tunneling

IPSec tunneling

QUESTION 93
How is NetEdit installed at a customer location?

Via an Aruba NetEdit hardware appliance

Via a DVD using a virtualized platform like Microsoft’s Hyper-V

Via the Aruba Central cloud solution

Via an OVA file and a virtualized platform like VMware’s ESXi

QUESTION 94
Examine the configuration performed on newly deployed AOS-CX switches:

After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?

Define the server group cppm

Set the ports to client-mode

Create and assign a local user role to the ports

Enable change of authorization (CoA)

QUESTION 95
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.
Which statement is correct about this situation?

802.1X must be configured to work in fallback mode

Device fingerprinting is required for authentication

The client-limit setting for port access needs to be changed

Device mode should be implemented

Loading …