Enhance your career with NSE8_812 PDF Dumps – True Fortinet Exam Questions [Q32-Q55]

15Feb 2026 by admin No Comments

Rate this post

Enhance your career with NSE8_812 PDF Dumps – True Fortinet Exam Questions

New (2026) Download free NSE8_812 PDF for Fortinet Practice Tests

Fortinet NSE8_812, also known as the Fortinet NSE 8 – Written Exam, is a certification exam designed to test the knowledge and skills of experienced network security professionals. NSE8_812 exam is intended for individuals who have a deep understanding of Fortinet’s security solutions and are looking to become certified experts in the field. The Fortinet NSE8_812 exam is a rigorous, comprehensive test that covers a wide range of topics related to network security, including advanced threat protection, network design, and security policies.

NO.32 You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients’ mail What are two possible reasons for this problem? (Choose two.)

The FortiMail access control rule to relay from Office 365 servers FQDN is missing.

The FortiMail DKIM key was not set using the Auto Generation option.

The FortiMail access control rules to relay from Office 365 servers public IPs are missing.

A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.

NO.33 Refer to the exhibit showing a firewall policy configuration.

To prevent unauthorized access of their cloud assets, an administrator wants to enforce authentication on firewall policy ID 1.
What change does the administrator need to make?

Option A

Option B

Option C

Option D

NO.34 You deployed a fully loaded FG-7121F in the data center and enabled sslvpn-load-balance. Based on the behavior of this feature which statement is correct?

You can use src-ip or dst-ip-dport on dp-load-distribution-method to make SSL VPN load balancing work as expected.

If an FPM goes down, SSL VPN IP pool IP addresses will be re-allocated to the remaining FPMs.

To have better traffic distribution you should use IP pools that increment in multiples of 12.

Enabling SSL VPN load balancing will clear the session table.

NO.35 Refer to the exhibit.

What is happening in this scenario?

The user status changed at FortiClient EMS to off-net.

The user is authenticating against a FortiGate Captive Portal.
C The user is authenticating against an IdP.

The user has not authenticated on their external browser.

NO.36 Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration.
Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

NO.37 Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode

Traffic on AccountVInk and SalesVInk will not be accelerated.

The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.

Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.

OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

NO.38 An automation stitch was configured using an incoming webhook as the trigger named ‘my_incoming_webhook’. The action is configured to execute the CLI Script shown:

NO.39 You are designing a setup where the FortiGate device is connected to two upstream ISPs using BGP. Part of the requirement is that you must be able to refresh the route advertisements manually without disconnecting the BGP neighborships.
Which feature must you enable on the BGP neighbors to accomplish this goal?

Synchronization

Deterministic-med

Graceful-restart

Soft-reconfiguration

NO.40 Refer to the exhibit, which shows a Branch1 configuration and routing table.

In the SD-WAN implicit rule, you do not want the traffic load balance for the overlay interface when all members are available.
In this scenario, which configuration change will meet this requirement?

Change the load-balance-mode to source-ip-based.

Create a new static route with the internet sdwan-zone only

Configure the cost in each overlay member to 10.

Configure the priority in each overlay member to 10.

NO.41 Refer to the exhibits.

A customer is trying to restore a VPN connection configured on a FortiGate. Exhibits show output during a troubleshooting session when the VPN was working and the current baseline VPN configuration.

Which configuration parameters will restore VPN connectivity based on the diagnostic output?

NO.42 Refer to the exhibit showing an SD-WAN configuration.

According to the exhibit, if an internal user pings 10.1.100.2 and 10.1.100.22 from subnet 172.16.205.0/24, which outgoing interfaces will be used?

port16 and port1

port1 and port1

port16 and port15

port1 and port15

NO.43 Refer to the CLI output:

Given the information shown in the output, which two statements are correct? (Choose two.)

Geographical IP policies are enabled and evaluated after local techniques.

Attackers can be blocked before they target the servers behind the FortiWeb.

The IP Reputation feature has been manually updated

An IP address that was previously used by an attacker will always be blocked

Reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored

NO.44 Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.)

Option A

Option B

Option C

Option D

NO.45 Refer to the exhibit.

You need to create a base SD-WAN configuration that includes SD-WAN rules and Performance SLAs for spoke sites with various connectivity types. It needs to be done in a way that can be easily applied to new sites with a minimum amount of change. How should you create the SD-WAN zones?

With members and assign overlay interfaces

With members without interface assignments

With no members configured

With members and assign interfaces but do not specify a gateway

NO.46 Refer to The exhibit, which shows a topology diagram.

A customer wants to use SD-WAN for traffic generated from the data center towards Branches. SD-WAN on HUB should follow the underlay condition on each Branch and the solution should be scalable for hundreds of Branches.
Which SD WAN-Rules strategy should be used?

Manual based on route-tags

Lowest Cost SLA

Auto based on link quality

Best Quality based on route-tags

NO.47 Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

1 redundant packet for every 10 base packets

3 redundant packet for every 5 base packets

2 redundant packet for every 8 base packets

3 redundant packet for every 9 base packets

NO.48 Refer to the exhibit of a FortiNAC configuration.

In this scenario, which two statements are correct? (Choose two.)

A device that is modeled in FortiNAC is connected on VLAN 4093.

An unknown host is connected to port3.

The IP address of the FortiSwitch is 10.12.240.2.

Port8 is connected to a FortiGate in FortiLink mode.

* C. The IP address of the FortiSwitch is 10.12.240.2:This statement is correct based on the exhibit and your clarification. The exhibit lists the “IP Address” as 10.12.240.2 across multiple entries, including ports and VLANs associated with the device “sup-fgt-hw” (FortiSwitch). Your reasoning indicates that this IP is the management address of the FortiSwitch, as it is consistently shown as the IP for the device containing the ports. In Fortinet’s architecture, as described in the NSE 8 study guide, the management IP of a FortiSwitch is typically configured and visible in such configurations, especially when integrated with FortiGate and FortiNAC. The “Device” column labeling “sup-fgt-hw” further supports that this is the FortiSwitch, and the IP 10.12.240.2 is its management address. This aligns with FortiSwitch management and integration details in the NSE 8 study guide.
* D. An unknown host is connected to port3:This statement is correct as the exhibit highlights port3 under the “Name” column for the device “sup-fgt-hw” with a “Rogue Host” status in the “Connection” column, an IP address of 10.12.240.2, a Default VLAN of 100, and an Operational Status of “Link Up.” In FortiNAC, a “Rogue Host” indicates an unknown or unauthorized device connected to the network, which FortiNAC identifies for further action or isolation. This is consistent with FortiNAC’s capabilities for detecting and classifying unknown devices, as detailed in the NSE 8 study guide under network access control and rogue device detection.
* Why A and B are incorrect:
* A. A device that is modeled in FortiNAC is connected on VLAN_4093: This is incorrect based on your clarification that there is no device connected on that port-it is simply the default VLAN (4093) for that entry. The exhibit shows VLAN_4093 with a “Not Connected” status and
“Link Up” operational status, but no active device connection is indicated. The NSE 8 study guide emphasizes that FortiNAC requires an active connection and device profiling for a device to be considered “connected,” which is not evident here for VLAN_4093.
* B. Port8 is connected to a FortiGate in FortiLink mode: This is incorrect because the exhibit shows port8 with a “Learned Uplink” status, which, as you noted, refers to any kind of uplink and does not specifically indicate FortiLink mode. FortiLink mode is a specific configuration between FortiGate and FortiSwitch requiring explicit settings, which are not mentioned or implied in the exhibit. The NSE 8 study guide clarifies that FortiLink mode involves distinct configuration details (e.g., FortiLink interfaces), which are absent here.
Fortinet Network Security Expert 8 Study Guide References:
* FortiNAC 7.2 Admin Guide (NSE 8): Sections on Device Visibility, VLAN Management, and Rogue Device Detection.
* FortiSwitch 7.2 Admin Guide (NSE 8): Sections on FortiLink Configuration, Network Segmentation, and Management IP Configuration.
* FortiGate 7.2 Admin Guide (NSE 8): Sections on Integration with FortiNAC and FortiSwitch for Network Security.

NO.49 A customer has FortiAP devices in three branch offices managed from a FortiGate in the HQ. Each FortiAP is connected to a dedicated management VLAN.
The customer wants the users connected to the FortiAP SSIDs to use the branch local internet connection, but each branch uses a different VLAN ID for the bridge. HQ users travel to different branches and connect to the same SSID.
Which configuration option will solve this requirement?

Set each FortiAP to a wtp-group and use set vlan-pooling wtp-group on the VAP configuration with the corresponding VLAN ID configuration for each group.

Set a FortiAuthenticator for 802.1x authentication with the Tunnel-Type attribute set to VLAN and use set dynamic-vlan enable on the VAP configuration.

Use set vlan-pooling round-robin on the VAP configuration with the corresponding vlan-pool.

Use set vlan-pooling hash on the VAP configuration with the corresponding vlan-pool.

NO.50 Refer to the exhibits.

An administrator has configured a FortiGate and Forti Authenticator for two-factor authentication with FortiToken push notifications for their SSL VPN login. Upon initial review of the setup, the administrator has discovered that the customers can manually type in their two-factor code and authenticate but push notifications do not work Based on the information given in the exhibits, what must be done to fix this?

On FG-1 port1, the ftm access protocol must be enabled.

FAC-1 must have an internet routable IP address for push notifications.

On FG-1 CLI, the ftm-push server setting must point to 100.64.141.

On FAC-1, the FortiToken public IP setting must point to 100.64.1 41

NO.51 Refer to the exhibits.

You are configuring a Let’s Encrypt certificate to enable SSL protection to your website. When FortiWeb tries to retrieve the certificate, you receive a certificate status failed, as shown below.

Based on the Server Policy settings shown in the exhibit, which two configuration changes will resolve this issue? (Choose two.)

Disable Redirect HTTP to HTTPS in the Server Policy.

Remove the Web Protection Profile from this Server Policy.

Enable HTTP service in the Server Policy.

Configure a TXT record of the domain and point to the IP address of the Virtual Server.

NO.52 Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.) A)

B)

Option A

Option B

Option C

Option D

NO.53 A customer wants to use the FortiAuthenticator REST API to retrieve an SSO group called SalesGroup. The following API call is being made with the ‘curl’ utility:

Which two statements correctly describe the expected behavior of the FortiAuthenticator REST API? (Choose two.)

Only users with the “Full permission” role can access the REST API

This API call will fail because it requires that API version 2

If the REST API web service access key is lost, it cannot be retrieved and must be changed.

The syntax is incorrect because the API calls needs the get method.

NO.54 Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

FAC2 can only process requests when FAC1 fails.

FAC2 can have its HA interface on a different network than FAC1.

The FortiToken license will need to be installed on the FAC2.

FSSO sessions from FAC1 will be synchronized to FAC2.

NO.55 On a FortiGate Configured in Transparent mode, which configuration option allows you to control Multicast traffic passing through the?

Fortinet NSE8_812 exam is intended for experienced network security professionals who have a strong understanding of network security concepts and technologies. Candidates should have at least five years of experience in network security design, implementation, and management, as well as experience with Fortinet’s network security solutions.

100% Free NSE8_812 Files For passing the exam Quickly: https://www.practicematerial.com/NSE8_812-exam-materials.html

Leave a Reply Cancel reply