[2026] Use Valid Exam SMI300XS by PracticeMaterial Books For Free Website [Q11-Q34]

Q11. Before removing the midplane from the AS-8125GS-TNMR2, what are some of the required steps?
(Choose 2 answers.)

Q12. After removing the screws from the midplane bracket, what cables must be removed?(Choose 2 answers.)

Q13. Once you have removed all 12 screws that secure the motherboard to the motherboard tray, what is the proper way to remove the motherboard?

Q14. The SKU for the NVMe backplane is BPN-NVME5-HS219N-S24. True or False?

Q15. Once you remove the midplane lid from the AS-8125GS-TNMR2 system, how many total screws must be removed from the sides of the chassis in order to remove the midplane bracket?

Q16. Which two situations could occur if you forcefully shift the release lever without first unlocking the red lock?(Choose 2 answers.)

Q17. Exhibit:

To remove the midplane lid on the AS-8125GS-TNMR2 system, use your fingers to push in on the two handles toward the PCIe tray, then slowly lift the midplane lid up and out of the chassis at an angle.
True or False?

Q18. Before disconnecting the cables from the NVMe backplane, what precaution should be taken?

Q19. When reinstalling the motherboard tray, is it necessary to align it properly with the chassis grooves before securing it with screws? True or False?

Q20. What are the components on top of the motherboard in the AS-8125GS-TNMR2 system?(Choose 3 answers)

Q21. Exhibit:

There is a flap door over the ribbon cable connection. To open it, use your finger to press down on the top of the flap door and pop it open. True or False?

Q22. Exhibit:

The 2 cables attached to the midplane on the side closest to the PCIe tray that need to be removed are the I2C cable and power cable. True or False?

Q23. It is essential to connect the purple 5-volt power connector to the correct port to avoid damaging the AS-8125GS-TNMR2 system. True or False?

Q24. Before you can remove the NVMe backplane (BPN-NVME5-HS219N-S24) from the motherboard tray, what should you do with the hard drives in the system?

Q25. In the example system configuration shown in the video, is there an AOM card in the right AOM bracket?

Q26. To disengage a PCIe, motherboard, or GPU tray on the AS-8125GS-TNMR2 system, loosen the screws on either side of the tray, then slowly pull the tray out to disengage it. True or False?

Q27. When installing the NVMe backplane back into the motherboard tray, what cables need to be reconnected?

Q28. Before disconnecting the cables from the NVMe backplane, you should map or take a picture of the cables to ensure they are returned to the same locations. True or False?