[Mar 30, 2022] PD1-001 Ultimate Study Guide – PracticeMaterial [Q366-Q388]

30Mar 2022 by admin No Comments

4.4/5 - (5 votes)

[Mar 30, 2022] PD1-001 Ultimate Study Guide – PracticeMaterial

Ultimate Guide to Prepare PD1-001 Certification Exam for PDI+ in 2022

NO.366 During which of the following processes is the latent image applied to the photoconductor?

Fusing

Transfer

Developing

Writing

NO.367 When using a multimeter to check for continuity, which of the following settings should the multimeter be set to?

Ohms

AC Volts

DC Volts

Amps

NO.368 A customer wants their logo to be copied “more blue.” According to the technician’s test charts the colors are adjusted properly. Which of the following should the technician advise?

The cyan photoconductor needs to be replaced to make the copies more blue.

The color calibration needs to be carried out more frequently.

Adjusting the device to enhance the blue wil affect the other colors.

The magenta toner needs to be replaced to make the copies more blue.

NO.369 Which of the following components prevents the print head from clogging?

Purge unit

Absorption pads

Carriage

Ink supply

NO.370 A technician finishes service on a MFD. Which of the following is MOST appropriate for the technician to do next?

Inform the primary contact person about the service that was performed and check for further questions.

Write out a detailed and technical description of the problem and solution, and leave it on the MFP for all users to read.

Make appropriate service notes so that key users can call and learn what service was performed.

Go to the next service call and inquire at the end of the day if the device is stil functioning properly.

NO.371 The function of a one-way gear is:

to drive a motor in one direction.

to provide drive in only one direction at a time.

to provide drive only when spun in one direction.

to drive a shaft clockwise and counter-clockwise.

NO.372 Neither the link or activity indicator lights on a NIC for a device are illuminated. The device cannot be reached by any computers across the network. Which of the following is the BEST step for a technician to take to begin troubleshooting?

Connect to the device via crossover cable to test connectivity.

Connect to the device via RS-232 cable to test connectivity.

Verify the DHCP server is online.

Replace the NIC on the computer.

NO.373 Which of the following are components of a solenoid? (Select TWO).

Electrode

Coil

Plunger

Chain

Resistor

NO.374 A customer desires that all print jobs to their color MFD product by default come out in black and white. Which of the following would be the default setting a technician would use?

Multifunction device

TCP/IP settings

Print driver

Color management

NO.375 When gathering information from a customer, open questions are used to:

provide closure to the customer on the actions taken.

gather general information or allow the customer to expand on issues.

gather specific information or allow the customer to confirm information.

provide information to the customer about the service that is being performed.

NO.376 After developing, which of the following is the next step in the print process?

Transfer

Charging

Fusing

Writing

NO.377 Which of the following are the FIRST steps in the general troubleshooting process?
(Select TWO).

Develop a plan of repair

Perform unit maintenance

Install replacement parts

Establish theory of failure

Observation/information gathering

NO.378 Which of the following is MOST likely to be used to detect the presence of paper in the ADF?

Solenoid

Relay

Clutch

Sensor

NO.379 The photoconductor can be charged using which of the following components?
(Select TWO).

Development unit

Cleaning roller

Charge roller

Erase lamp

Corona wire

NO.380 In CMYK printing, the K stands for:

the color blue.

the type of paper that must be used.

a type of offset press.

the color black.

NO.381 Which of the following are required for proper fusing to occur? (Select TWO).

Cleaning

Pressure

Charge

Scanning

Heat

NO.382 Which of the following should a technicians FIRST step be if a received fax has dark background?

Check the media in the local machine.

Test the telephone line quality.

Produce a test print on the local machine.

Check the operation of the remote machine.

NO.383 When scanning a color document all of the following file types can be created EXCEPT:

.TIFF.

.PDF.

.JPG.

.EXE.

NO.384 A client is printing a document they have received from one of their vendors on a LAN printing device. The document prints in landscape even though the printer is hard set to portrait mode and other documents print portrait. Which of the following could be the problem?

The print queue is set to landscape as default.

The page setup associated with the document in the application is set to landscape.

The print driver on their system is defaulting to landscape mode for that particular application.

The printers local defaults are set to landscape mode.

NO.385 Which of the following is an additive primary color?

White

Cyan

Black

Red

NO.386 Which of the following are types of physical ports on printers? (Select TWO).

LPT

LPR

RAW

USB

SMB

NO.387 When setting up a standard Ethernet printing port on a users PC, a technician needs to know which of the following?

DNS settings

IP address

Device serial number

MAC address

NO.388 If a color capable copying device is outputting images that are greener than the original document, which of the following combinations of subtractive colors should the technician adjust to lighten the green output?

Black and yellow

Green and magenta

Cyan and black

Yellow and cyan

Loading …

PDI+ Fundamentals-PD1-001 Exam-Practice-Dumps: https://www.practicematerial.com/PD1-001-exam-materials.html

Leave a Reply Cancel reply