[May 03, 2023] HPE6-A69 Exam Dumps PDF Updated Dump from PracticeMaterial Guaranteed Success [Q28-Q44]

03May 2023 by admin No Comments

Rate this post

[May 03, 2023] HPE6-A69 Exam Dumps PDF Updated Dump from PracticeMaterial Guaranteed Success

Pass Your HP Exam with HPE6-A69 Exam Dumps

The HP HPE6-A69 certification exam is an essential certification for network professionals who want to demonstrate their expertise in switching technologies. This certification validates the candidate’s knowledge and skills in configuring and managing complex switching solutions. The certification is recognized globally and is highly valued by organizations that require skilled network professionals to manage their switching infrastructure.

To prepare for the HPE6-A69 exam, candidates should have a good understanding of Aruba switching solutions and be familiar with the topics covered in the exam. There are a variety of resources available to help candidates prepare, including study guides, practice exams, and online training courses. Candidates can also attend Aruba certification training programs to gain hands-on experience with Aruba switching solutions.

Q28. (Scenarios may contain multiple errors which may or may not Impact the solution) Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration, it is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows:
There is an error message staling “incompatible interface.” Which interfaces are the cause of the error? (Select two.)

1/1/12 10GBaseT SFP*+ 30m Cat6A Transceiver

1/1/49 40G QSFP+ 15m Active Optical Cable

1/1/13 10GBaseT SFP+ 30m Cat6A Transceiver

1/1/48 iGBaseT 100m Cat5e Transceiver

1/1/50 40G QSFP+ 15m Active Optical Cable

Q29. (Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit.

An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows

The configuration includes:

There is an error message stating “mismatched group speed” What should you add to the configuration to correct the error?

“system Interface-group 1 speed I0g”

“allow-unsupported-transceiver

“speed 10-full” under interfaces 1/1/12 and 1/1/13

“speed 40-full” under interfaces 1/1/49 and 1/1/50

Q30. Refer to the exhibit.

You want to protect the aggregation layer if the VSXISL falls. Where should you place a VSX keepalive link?

On VSX LAG 1

On a dedicated link created using port 1’1/48 of each aggregation switch

On the OOBM ports of both aggregation switches

On VSX LAG 101

Q31. Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs.
What are valid questions to determine their wired network needs? (Select two.)

How experienced is your networking team?

What is the current cabling deployed in the location?

What are the current device capabilities and topology?

Do you plan to add new customer services?

How much do you plan to spend in the new wired network?

Q32. Which statement is true about NAE scripts’?

The System Resource Monitor is the only script Installed on the system by default.

The System Resource Monitor and Health Monitor a/e the only scripts installed on the system by default

No script is installed on the system by default.

The Health Monitor is the only script installed on the system by default.

Q33. With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use.

What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway” (Select two.)

IP Protocol 6 should not be blocked on me datapath

IP Protocol 47 should not be blocked in the data-path

The ArubaOS-CX switch and Aruba gateway should have an end-to-end MacSec connection

The ArubaOS-CX switch and Aruba gateway should be EBGP peers.

Change the default MTU on the data-path between the switch and gateway

Q34. When applying me following access-Iist to an ArubaOS-CX 6300 switch:

How does this ACL behave on the selected switch? (Select two.)

The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs

The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.

The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs

Q35. An administrator warns to create an ACL.
Permit traffic from 192.168.10, 65 through 192.168.10.94
Permit traffic from 192 168 10 104 through 192 16810.119
deny all other ip traffic
Which configuration is required to accomplish the administrator’s goals?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q36. When an ArubaOS-CX switch uses the temporary copy of the coring state database, how does NetEdit validate if the configuration is correct?

Semantic validation

Syntax validation

Deploy validation

Planned validation

Q37. Refer to the following configuration:

How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches?
(Select two)

Use NetEdit to replicate the configuration of QoS policies to all wired switches

in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.

With ClearPass and downloadable user roles, you can add QoS policies for user roles

QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches

Q38. The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.
The client’s default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.

What advice can you offer the customer? (Select two)

The ISL Bandwidth should be upgraded

Agg-1 and Agg-2’s hardware forwarding table profile should be changed to “L3-agg”.

The -system-mac’ of Agg-1 should be changed to an unused address from the unicast private address range

The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.

The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.

The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.

Q39. A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings.
VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q40. The rate-limiting QoS feature can be implemented on all ArubaOS-CX platforms However, some features are platform dependent. Which statements are true” (Select two.)

Unknown unicast rate limiting is supported on all ArubaOS-CX platforms

ICMP-Rate limiting is supported on all ArubaOS-CX platforms.

Broadcast-rate limiting is supported on all ArubaOS-CX platforms

Multicast and broadcast rate limits cannot be applied at the same time on the same Interface

Q41. You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?

Enable debug of vri with “console” set as the destination

Setup a mirror session to generate a Tshark file.

Setup a mirror session to niter packets for TCPDUMP analysis

Check the configured VLANs using “show vsx config-consistency”

Q42. Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

Q43. Which statement is true regarding IP-SLA?

ArubaOS-CX supports Doth SLA configuration through CU and by agents through the NAE.

ArubaOS-CX supports forever tests

ArubaOS-CX supports on-demand as well as forever tests.

The default and minimum probe interval for voip SLA is 180 seconds

Q44. The customer is implementing new ArubaOS-CX 6300 switches into an environment that has third-party switches and uses centralized authentication from Microsoft Active Directory and TACACS* servers What would be a valid configuration requirement for ArubaOS-CX switches for centralized user authentication?

Importing a TACACS server certificate for TLS authentication into the switch

Defining a TACACS server group for authentication in the switch configuration

Enabling the active directory VSA in the switch for radius authentication

Using a PAM extension for LDAP authentication with Active Directory Server.

Loading …

The HP HPE6-A69 exam is an important certification for IT professionals who want to specialize in switching and networking. It is designed to validate the skills and knowledge of professionals in the field of switching and is an important step towards becoming an Aruba Certified Switching Expert. With the right preparation, candidates can pass the exam and take their careers in networking to the next level.

New Real HPE6-A69 Exam Dumps Questions: https://www.practicematerial.com/HPE6-A69-exam-materials.html

Leave a Reply Cancel reply