Download Cisco 300-510 Exam Dumps to Pass Exam Easily in 2025 [Q19-Q43]

10Apr 2025 by admin No Comments

Rate this post

Download Cisco 300-510 Exam Dumps to Pass Exam Easily in 2025

Get 100% Real Free CCNP Service Provider 300-510 Sample Questions

Cisco 300-510 is an advanced level certification exam designed for professionals who want to enhance their skills and knowledge in the field of service provider routing solutions. 300-510 exam is designed to test the abilities of candidates to configure, troubleshoot, and manage advanced routing technologies that are used in a service provider environment. Implementing Cisco Service Provider Advanced Routing Solutions certification validates the skills and knowledge necessary for the implementation of advanced routing technologies and solutions.

Introduction to Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

It is a 90-minute test affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam tests the candidate’s knowledge of integrating VPN services, including Layer 2, Layer 3, and IPv6, from the service provider. Different types of 310-510 SPRI practice test helps the students to prepare for the exam.

NEW QUESTION 19
Refer to the exhibit. Router 1 has established an SR-TE tunnel with router 2.
Which statement describes this configuration?

Router 1 has a list of labels used to explicitly lay out a path to router 2.

Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

Router 2 is the head-end tunnel and has explicitly set a path to router 1.

NEW QUESTION 20

Refer to the exhibit. R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?

The BGP session does not come up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R3, but not between R1 and R2.

The BGP session comes up between R1 and R2, but not between R1 and R3.

NEW QUESTION 21
Refer to the exhibit.

Refer to the exhibit. This network is deployed with all connected links configured to run IS-IS. The routing protocol is enacted globally on each router, and the network engineer expects full routing Information to be shared among all routers. R5 is receiving routes from R4 but is missing routes from R1. Which action corrects the issue so that all routes are shared among the routers?

Configure all routers to reside in toe area.

Configure RI and RS as Level 1″Level 2

Configure R3 as a Level 2 we.

Configure R5 in the same as RI,

NEW QUESTION 22
Refer to the exhibit. Company A established BGP sessions with several ISPs. A network engineer at the company must filter out all traffic except for routes that transit AS 152. The engineer configured the filtering policy “permit _152$_(_[0-9])” on R1, but after applying the configuration, the engineer notices that other routes are still visible. Which action resolves the issue?

Add a second filtering policy in the format ip access-list 1 permit ^152_([0-9]+).

Add a second filtering policy in the format ip prefix-list 1 permit ^152^.

Change the filtering policy to ip explicit-path 1 permit $152^.

Change the filtering policy to ip as-path access-list 1 permit _152_.

NEW QUESTION 23
Level 3 switch SW1 is part of an EIGRP enabled network located at the edge of an are a. Cisco Express Forwarding and SSO are enabled on the router. A network engineer must minimize the downtime of data-transmit services in the network. HSRP group 2 has already been configured with standby preempt delay minimum 2 and standby timers 140. Which additional action must the engineer take on SW1 to suppress routing flaps for 2 minutes?

Configure timers standby 2 wait 2 under the HSRP group 2 configuration.

Configure timers nsf route-hold 120 under the global EIGRP configuration.

Configure timers nsf signal 2 under the global EIGRP IPv4 address family.

Configure timers standby 2 coverage 120 under the HSRP group 2 configuration.

NEW QUESTION 24
You have configured routing policies on a Cisco IOS XR device with routing policy language.
Which two statements about the routing policies are true? (Choose two.)

The routing policies affect BGP-related routes only.

If you make edits to an existing routing policy without pasting the full policy into the CLI, the previous policy is overwritten.

You can change an existing routing policy by editing individual statements.

The routing policies are implemented in a sequential manner.

The routing policies are implemented using route maps.

NEW QUESTION 25
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.

NEW QUESTION 26
Refer to the exhibit.

CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?

Option A

Option B

Option C

Option D

NEW QUESTION 27
Refer to the exhibit.

CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core. What step can be done to troubleshoot the issue?

Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.

Configure BGP between CE and PE routers.

Confirm that IS-IS is running with metric-style narrow.

Verify the MPLS LSPs.

NEW QUESTION 28
Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?

The MED attribute can be applied on R2 to influence R1 to use it as the primary path.

The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.

The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.

The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.

NEW QUESTION 29
Refer to the exhibit. A network engineer must correct the security policy on the EDGE_R router, which is connected to two Tier 1 ISPs. After another engineer added ip as-path access-list 11 permit 11 to EDGE_R, some routes from AS 11 and AS 4832 started to appear in the routing information base (RIB). Traffic control via Community options is disabled on both ISPs. How should the network engineer update the router configuration on EDGE_R so that only routes for AS 11 are permitted?

Configure ip as-path prefix-list 11 permit _11$.

Configure ip as-path access-list 11 permit _11_.

Configure ip as-path distribution-list 11 deny A[0-9]+S.

Configure ip as-path access-list 11 deny 4832$.

NEW QUESTION 30
Refer to the exhibit.

AJI four routers on the network reside in the same data center The four routers are running IS-IS between them in Level 1 mode within an IPv4 network After a network engineer installed several new servers connected to R4, users connected via R1 reported they could not connect to applications on the servers The engineer has determined that R4 is receiving routes from R3 but it is failing to receive routes from R1 Which action must the engineer take to resolve the issue?

Configure R3 only lo be a Level 1’Level 2 router.

Configure R2 and R3 to be Level 1/Level 2 routers

Configure R2 only to be a Level 2 router

Configure R1 and R4 to be Level 2 routers

NEW QUESTION 31
Refer to the exhibit.

CE1 is the gateway router into the provider network via PE1. A network operator must inject a default route into OSPF area 0. All devices inside area 0 must be able to reach PE1. Which configuration achieves this goal?

Option A

Option B

Option C

Option D

NEW QUESTION 32
Refer to the exhibit.

CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core. What step can be done to troubleshoot the issue?

Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.

Configure BGP between CE and PE routers.

Confirm that IS-IS is running with metric-style narrow.

Verify the MPLS LSPs.

NEW QUESTION 33
Refer to the exhibit.

An administrator is troubleshooting Internet access issues on a customer’s network. After applying this ISIS configuration to R1, the administrator notices that it fails to redistribute the default route into IS-IS. After checking the connectivity between the ISIS router and the ISP router the engineer confirmed there is Layer 3 connectivity between them Which action should be taken to correct the problem?

Associate the default route with a VRF

Add the default-information originate command to the configuration

Configure the default route under any routing protocol other than IS-IS

Configure R1 as a Layer 1 router

NEW QUESTION 34
Refer to the exhibit.

Refer to the exhibit. A network engineer just replaced five routers on this OSPF network. When the routing protocol is brought up, R5 cannot reach routes that originate on R1. The engineer verified that all connected links have established neighbor relationships. R5 reaches routes originating on R3 and R4. Which action resolves the issue?

Configure an OSPF virtual link to bridge Area O on routers R3 and R4.

Configure automatic neighbor discovery on RI and R5.

Configure OSPF to have a contiguous Area O.

Configure each link to be point-to-point.

NEW QUESTION 35
A network operator working for a telecommunication company with an employee id: 4074:92:707 is planning to implement the Nonstop Forwarding (NSR) feature on the customer’s core network.
After getting the configuration ready for NSR. on which router should the operator implement NSR changes?

on the CE router

on the ASBR router

on the ABR router

on the PE router

NEW QUESTION 36
Refer to the exhibit.

Refer to the exhibit The branch office in area 10 is connected to HQ via Frame Relay uplinks with bandwidth constraints After a recent implementation of QoS on the R2 and R3 networks the system has been logging %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x224E321, alignment 0 messages To reduce traffic load and memory utilization on R2 and R3 the network engineer configured R1 to announce only one user subnet per location by issuing the summary address 192.168.0.0 255.255.248.0 command en R1 However, the engineer noticed that router R2 still has two routes and a summary address from HQ and R3 also has two routes from HQ Which two actions must the engineer take on R1 to fix the issue so that only one route is announced’ (Choose two.)

Configure the subnet range with the network command under the IS-IS process.

Configure RI as a Level 1 device.

Redistribute both routes into the ISIS process.

Configure a summary route for Level 1-Level 2 devices.

Configure a summary route for Level 1 devices.

NEW QUESTION 37
Refer to the exhibit.

Routers RA and RB are IS-IS peers configured for NSF but router RC is an IS-IS peer without NSF capability If RA undergoes processor switchover what is the effect on the network environment?

If RC is operating without the Cisco configuration option all three routers tear down their peering relationships and re-establish peering

All peer relationships remain up and the link-state database is unchanged

All peer relationships remain up, but the link-state database is rebuilt on each device

If RC is operating without the Cisco configuration option only 2 routers tear down their peering relationships and re-establish peering

NEW QUESTION 38
Which two BGP route reflector attributes should be implemented to prevent routing loops?
(Choose two)

CLUSTER_ID

ORIGINATOR_ID

CLUSTER_LIST

COMMUNITY

AS_PATH

NEW QUESTION 39
Refer to the exhibit.

An engineer applied the summarization configuration on R1 for four networks (192.168.20.0/24 to 192.168.23.0/24) in area 1 and eight networks (192.168.32.0/24 to 192.168.39.0/24) in area 2 to stop the flooding of all the customer routes. While checking the routing table of R2, the engineer noticed that R1 is still sending only specific routes to R2. Which configuration should the engineer apply on R1 to summarize routes?

Option A

Option B

Option C

Option D

NEW QUESTION 40
Refer to the exhibit. An engineer is addressing an IS-IS design issue which is running within the topology.
All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet.
Which statement about the design is true?

R4 prefer to reach R5 using R1 as the next hop

All links have equal cost if the default metric is used

R5 prefers to use R4 as the next hop for all routes

R1 prefer to use R5 as the next hop to reach R4

NEW QUESTION 41
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.

NEW QUESTION 42
Refer to the exhibit. An engineer is troubleshooting connectivity issues on the MPLS core network. A customer connected through R4 cannot reach the OSPF domain on R5. While checking the routing table of R1, the engineer cannot see all the routes from R3 and R5. Which task must the engineer perform so that R4 is able to reach R5?

Enable OSPF peering and configure route redistribution between routers R4 and R1.

Enable route filtering between routers R1 and R3.

Enable MP-BGP peering on routers R1, R3, R4, and R5.

Enable OSPF on the Area-0 routers and configure MP-BGP between routers R1 and R3.

NEW QUESTION 43
Refer to the exhibit.

An administrator is troubleshooting network issues on a customer’s network PE1 cannot form an LDP relationship with PE2 using LDP ID 192 168.1.1. Due to this connectivity issue, the customer’s routes behind both PE routers cannot be exchanged. Which action must the administrator take to correct the problem?

Configure PE2 to automatically select its own LDP router ID with 192.168.1.1.

Create a targeted LDP session on PE2 to override the missing routing table entry on PEL

Configure PE1 with a static route to 192 168.1.1.

Enable LDP session protection on the link that P1 uses as the next hop to PE2.

300-510 Study Guide Realistic Verified Dumps: https://www.practicematerial.com/300-510-exam-materials.html

Introduction to Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

Leave a Reply Cancel reply