PracticeMaterial NACE-CIP1-001 dumps & CIP Level 1 Sure Practice with 100 Questions [Q42-Q59]

NEW QUESTION 42
Stripe coats are generally applied to:

NEW QUESTION 43
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:

NEW QUESTION 44
Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT

NEW QUESTION 45
The initial steel condition is important to the NACE Inspector because:

NEW QUESTION 46
ISO SA 2.5 is defined as:

NEW QUESTION 47
Polymerization is the process of:

NEW QUESTION 48
Whenever dissimilar metals must join, the most common practice is to

NEW QUESTION 49
Removal of welds splatter is required:

NEW QUESTION 50
You are the NACE Inspector on a job where the Owner’s specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:

NEW QUESTION 51
Which of these tests uses a syringe?

NEW QUESTION 52
A NACE Coating Inspector is permitted to transport coating material when:

NEW QUESTION 53
Surface profile describes:

NEW QUESTION 54
The Inspector’s Log Book is generally:

NEW QUESTION 55
Most industrial coatings are:

NEW QUESTION 56
What is used to determine compressed air cleanliness?

NEW QUESTION 57
You have just received your NACE CIP Level 1 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:

NEW QUESTION 58
NACE No. 4/SSPC-SP-7 is a joint standard for

NEW QUESTION 59
Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners’ representative in advance of the meeting you sense he/she does not understand the importance of the hold point.
As a NACE CIP Level 1 Inspector your preferred course of action is to: