CIP Level 1 NACE-CIP1-001 Practice Test Engine Try These 100 Exam Questions [Q28-Q43]

NO.28 Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT

NO.29 Common errors that can produce inaccurate readings when using Wet Film Thickness (WFT) gauges include:
Select All That Apply

NO.30 The most important factor resulting in improved job site safety is:

NO.31 What is the minimum spot measurement value allowed by SSPC-PA 2 in each 10 m2 (100 ft2) area?

NO.32 Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners’ representative in advance of the meeting you sense he/she does not understand the importance of the hold point.
As a NACE CIP Level 1 Inspector your preferred course of action is to:

NO.33 Whenever dissimilar metals must join, the most common practice is to

NO.34 Digital hygrometers

NO.35 The initial steel condition is important to the NACE Inspector because:

NO.36 You are the NACE Inspector on a job where the Owner’s specification requites you to perform a twice daily check of blast pressure at the nozzle. It is now day 30 on the job and all of your readings have been within compliance. The Contractor complains that these checks taking up much time and in view of the compliant results they are unnecessary.
Your FIRST preferred course of action is to:

NO.37 ASTM Standards are applicable:

NO.38 Due to a previous premature coating failure the owner has required the original coating applicator to return to remove and replace 10,000 square feet of a failed three coat system at the applicator’s cost. Due to the financial implications of another failure, the owner has offered you the job as the NACE CIP Level 1 Coating Inspector and explained that he expects you to be his “insurance policy” for this job. You have never been involved in a warranty job before and are unfamiliar with the coating system.
Your preferred FIRST course of action is to:

NO.39 Removal of welds splatter is required:

NO.40 The NACE Inspector should perform tests for soluble salts:

NO.41 What is used to determine compressed air cleanliness?

NO.42 The Inspector should record the serial numbers of inspection instruments:

NO.43 To achieve consistently accurate results with ALL alt test equipment