Based on Official Syllabus Topics of Actual HP HPE7-A01 Exam [Q87-Q106]

NEW QUESTION 87
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

NEW QUESTION 88
A customer wants to deploy a Gateway and take advantage of all the SD-WAN features. Which persona role option should be selected?

NEW QUESTION 89
You are setting up a customer’s 15 headless loT devices that do not support 802.1X. What should you use?

NEW QUESTION 90
Review the exhibit.

You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The 10.102.250.0
/24 subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?

NEW QUESTION 91
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the “show arp” command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?

NEW QUESTION 92
What are two important metrics for network performance monitoring? (Select two.)

NEW QUESTION 93
You are helping an onsite network technician bring up an Aruba 9004 gateway with ZTP for a branch office The technician was to plug in any port for the ZTP process to start Thirty minutes after the gateway was plugged in new users started to complain they were no longer able to get to the internet. One user who reported the issue stated their IP address is 172.16 0.81 However, the branch office network is supposed to be on 10.231 81.0/24.
What should the technician do to alleviate the issue and get the ZTP process started correctly?

NEW QUESTION 94
A customer is looking Tor a wireless authentication solution for all of their loT devices that meet the following requirements:
– The wireless traffic between the IoT devices and the Access Points
must be encrypted
– Unique passphrase per device
– Use fingerprint information to perform role-based access
Which solutions will address the customer’s requirements? (Select two.)

NEW QUESTION 95
A new network design is being considered to minimize client latency in a high-density environment. The design needs to do this by eliminating contention overhead by dedicating subcarriers to clients.
Which technology is the best match for this use case?

NEW QUESTION 96
What does the 802.3bz standard describe?

NEW QUESTION 97
Refer to the exhibit.

In the Core-2 configuration of spanning-tree instance 2 priority 0, what needs to be configured to enable the root for VLAN 20 while VLAN 10 remains root on Core-1?

NEW QUESTION 98
What does the 802.3bz standard describe?

NEW QUESTION 99
Match the topics with the underlying technologies (Options may be used more than once or not at all.)

NEW QUESTION 100
What is one advantage of using OCSP vs CRLs for certificate validation?

NEW QUESTION 101
You are setting up a customer’s 15 headless loT devices that do not support 802.1X..
What should you use?

NEW QUESTION 102
A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests). What is the correct configuration to ensure that APs will work properly?

NEW QUESTION 103
Match the appropriate QoS concept with its definition. (Options may be used more than once or not at all.)

NEW QUESTION 104
The administrator notices that wired guest users that have exceeded their bandwidth limit are not being disconnected Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
An administrator has performed the following configuration

What is the most likely cause of this issue?

NEW QUESTION 105
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

NEW QUESTION 106
For the Aruba CX 6400 switch, what does virtual output queueing (VOQ) implement that is different from most typical campus switches?